Here is the one of my latest project the I have created for a 5 1/2 acre lot in the town of Lisbon off Hwy 74. The home is all new construction on an old quarry lot that I designed the home for the site with a exposed ranch that follows the curves of the hill on the south side of the pond. With this layout the house is set to capture the best views of the pond and tree lined backdrop. The home is 4020 sq. ft. split design with the large master suite with his and her’s walk in closets and a large bath with a large linen cabinet connected to the main laundry off the upper garage hall entry. This is open to a large mudroom with lockers and a message center and bench with large walk in closet. This side of the house also includes a large office across from the master bedroom to complete the master side of the house. On the other side is two large bedrooms on the other side both with walk in closets and a full bath. The center of the home is a incredible 24′ x 60′ main center living space with front lounge and a central kitchen and dining booth with the 23’x23′ great room with cathedral ceilings 25′ height that looks out to the pond and also boasts a large open loft. The lower level features a lower 2 car garage that is over sized and a 1,500 sq. ft. finished space that includes a large rec. room, theater room, guest room and bath.
Shown below is the site plans that is setup to take advantage of the best views of the pond and sets the house into the hill for the least amount of excavation plus the locations of all drives.
To start the 3-D model I crate a block shape of the home to give the basic shape of the home to viewed 360 degrees.
After a review of the basic model any adjustments are made to the final plans.
Color selection is the next stage of the modeling.
The next step is adding all of the details of trim and railings.
After this stage I can then add landscape and interior design to finish bring the model to the final stage of the design.